To Reset The System Controller - Fujitsu SPARC Enterprise T1000 Installation Manual

diag_verbosity
diag_level
diag_mode
sys_autorunonerror
ser_baudrate
ser_parity
ser_stopbits
ser_data
netsc_enetaddr
sys_enetaddr
Note – After setting the configuration parameters, you must reset the system
controller for the new values to take affect. See
page

To Reset the System Controller

▼
●
Issue the resetsc command.
You are prompted to confirm that you want to reset the system controller. Type y
when prompted.
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
Note – To bypass the confirmation message, specify the –y flag to the resetsc
command.
The system controller resets, runs diagnostics, and returns to the login prompt.
ALOM POST 1.x
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTYC - Internal Loopback Test
34 SPARC Enterprise T1000 Server Installation Guide • April 2007
34.
TTY External - Internal Loopback Test, PASSED.
normal
max
normal
false
9600
none
1
8
xx:xx:xx:xx:xx:xx
yy:yy:yy:yy:yy:yy
"To Reset the System Controller" on