Important Notes; Safety Instructions - Fujitsu PRIMERGY TX100 S2 Core Edition Operating Manual

3

Important notes

In this chapter you will find essential information regarding safety when working
on your server.
3.1

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations".
This device meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the server in the intended
environment, please contact your sales outlet or our customer service team.
V
CAUTION!
The actions described in this manual must be performed by technical
specialists.
Equipment repairs must be performed by service staff. Please note
that unauthorized interference with the system will void the warranty
and exempt the manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
Before starting up
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device (see
"Technical data" on page
If the server has been moved from a cold environment, condensation
may form both inside and on the outside of the machine.
Wait until the server has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the server if this requirement is not met.
Only transport the server in the original packaging or in packaging
that protects it from impacts and jolts.
TX100 S2 Core Edition
17).
Operating Manual
section
23