Deleting a Filter Policy
Before you can delete a filter, you must remove the filter association from the applied ingress and
egress SAPs and network interfaces.
•
•
•
From an Ingress SAP
To remove a filter from an ingress SAP, enter the following CLI commands:
CLI Syntax: config>service# [epipe | ies | vpls] service-id
Example
From an Egress SAP
To remove a filter from an egress SAP, enter the following CLI commands:
CLI Syntax: config>service# [epipe | ies | vpls] service-id
Example
7210 SAS E Router Configuration Guide
From an Ingress SAP on page 93
From an Egress SAP on page 93
From the Filter Configuration on page 94
sap port-id[:encap-val]
ingress
no filter
:
config>service# epipe 5
config>service>epipe# sap 1/1/2:3
config>service>epipe>sap# ingress
config>service>epipe>sap>ingress# no filter
sap port-id[:encap-val]
egress
no filter
:
config>service# epipe 5
config>service>epipe# sap 1/1/2:3
config>service>epipe>sap# egress
config>service>epipe>sap>egress# no filter
Filter Policies
Page 93