Dodge Charger SRT 392 2017 Owner's Manual page 74

72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Frequently Asked Questions About Installing Child Restraints With Seat Belts
Can the rear-facing child restraint
touch the back of the front passenger
seat?
Can the head restraints be removed?
Can the buckle stalk be twisted to
tighten the seat belt against the belt
path of the child restraint?
Installing A Child Restraint With A Switchable
Automatic Locking Retractor (ALR):
Child restraint systems are designed to be secured in
vehicle seats by lap belts or the lap belt portion of a
lap/shoulder belt.
WARNING!
• Improper installation or failure to properly secure a
child restraint can lead to failure of the restraint. The
child could be badly injured or killed.
• Follow the child restraint manufacturer's directions
exactly when installing an infant or child restraint.
Yes Contact between the front passenger
seat and the child restraint is al-
lowed, if the child restraint manufac-
Yes
No Do not twist the buckle stalk in a
seating position with an ALR retrac-
1. Place the child seat in the center of the seating position.
For some second row seats, you may need to recline the
seat and/or raise the head restraint to get a better fit. If
the rear seat can be moved forward and rearward in the
vehicle, you may wish to move it to its rear-most
position to make room for the child seat. You may also
move the front seat forward to allow more room for the
child seat.
2. Pull enough of the seat belt webbing from the retractor
to pass it through the belt path of the child restraint. Do
not twist the belt webbing in the belt path.
3. Slide the latch plate into the buckle until you hear a
"click."
turer also allows contact.
Center Only may be removed.
tor.