280 UNDERSTANDING YOUR INSTRUMENT PANEL
Shift Light RPM Set-Up
The Shift Light RPM Set-Up allows you to set the shift light to
actuate for gears 1, 2, 3, 4, and 5-8. By pressing and releasing
the up/down arrow buttons on the touchscreen above and
below each listed gear, the RPM values will change in incre-
ments of 250 RPM. Pressing and holding the arrows will
change the RPM values in increments of 500 RPM, ranging
from 2000–6000 RPM (6.2L) and 2000–6250 RPM (6.4L). The
Shift Light setup screen may only be accessed if the feature is
enabled. Press the "Reset to factory default" button on the
touchscreen to change back to factory settings, or press the
"Shift Light Off" button on the touchscreen to turn the system
off completely.
VALET MODE
Valet Mode Activation