Ignition Park Interlock; Brake/Transmission Shift Interlock System; Eight-Speed Automatic Transmission - Dodge Charger SRT 392 2017 Owner's Manual

Hide thumbs Also See for Charger SRT 392 2017:
Table of Contents

Advertisement

NOTE: You must press and hold the brake pedal while
shifting out of PARK.

Ignition Park Interlock

This vehicle is equipped with an Ignition Park Interlock
which requires the transmission to be in PARK before the
ignition can be turned to the OFF mode. This helps the
driver avoid inadvertently leaving the vehicle without
placing the transmission in PARK. This system also locks
the transmission in PARK whenever the ignition is in the
OFF mode.

Brake/Transmission Shift Interlock System

This vehicle is equipped with a Brake Transmission Shift
Interlock system (BTSI) that holds the gear selector in
PARK unless the brakes are applied. To shift the transmis-
sion out of PARK, the engine must be running and the
brake pedal must be pressed.
The brake pedal must also be pressed to shift from NEU-
TRAL into DRIVE or REVERSE when the vehicle is
stopped or moving at low speeds.

Eight-Speed Automatic Transmission

The transmission gear range (PRNDM) is displayed both
on the gear selector and in the instrument cluster.
To select a gear range, press the lock button on the gear
selector and move the selector rearward or forward. To
shift the transmission out of PARK, the engine must be
running and the brake pedal must be pressed. You must
also press the brake pedal to shift from NEUTRAL into
DRIVE or REVERSE when the vehicle is stopped or mov-
ing at low speeds (refer to "Brake/Transmission Shift
Interlock System" in this section). Select the DRIVE range
for normal driving.
Automatic Transmission Gear Selector
STARTING AND OPERATING 319
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srt hellcat 2017

Table of Contents