Dodge Charger SRT 392 2017 Owner's Manual page 23

Hide thumbs Also See for Charger SRT 392 2017:
Table of Contents

Advertisement

Emergency Key Removal
2. Insert the tip of the emergency key or a #2 flat blade
screwdriver into the slot and gently pry the two halves
of the key fob apart. Make sure not to damage the seal
during removal.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21
Separating Key Fob Case
3. Remove the battery by turning the back cover over
(battery facing downward) and tapping it lightly on a
solid surface such as a table or similar, then replace the
battery. When replacing the battery, match the + sign on
the battery to the + sign on the inside of the battery clip,
located on the back cover. Avoid touching the new
battery with your fingers. Skin oils may cause battery
deterioration. If you touch a battery, clean it with
rubbing alcohol.
4. To assemble the key fob case, snap the two halves
together.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srt hellcat 2017

Table of Contents