Figure 3-20 Connect Ethernet Cable - Bai cells Nova R9 Installation Manual

Baicells Nova R9 2.5GHz 10W Base Station Installation Guide
2. Connect the Ethernet cable.
Connect the Ethernet cable to the ETH0 interface of the base station, fix the cable on
the ETH0, and fasten the screw, as shown in Figure 3-20.

Figure 3-20 Connect Ethernet Cable

3. Connect the power cable.
Connect the 48V DC power connector to the PWR interface of the base station, as
shown in Figure 3-21.
Figure 3-21 Connect Power Cable
4. Connect the grounding cable
Connect the power adaptor grounding terminal to the grounding bar of the installation
site, as shown in Figure 3-22.
19