Table of Contents
Advertisement
Baicells Nova R9 2.5GHz 10W Base Station Installation Guide
GPS working frequency bands ~ L1: 1575.42MHz ± 1.023MHz.
GPS antenna feeder connector is N type.
2.
Pass one end of the GPS antenna feeder through the support tube, connect it to the N
type of GPS antenna, and then fasten the support tube to the GPS antenna.
3.
Fix the support tube on the pole.
4.
Fix the lower end of the cable and support tube with ribbon or tape.
5.
Fix the cable to the pole, as shown in Figure 3-16.
Figure 3-16 GPS Pole Installation
6.
To avoid the connector from getting loose due to cable waggle, fix the cable on the
pole. The cable and the pole should be fixed with a 10cm margin, to prevent cable
shrinking due to temperature reduction in winter, as shown in Figure 3-17.
Figure 3-17 GPS Cable Fixing
17
Advertisement
Table of Contents
