Install On Pole - Bai cells Nova R9 Installation Manual

Baicells Nova R9 2.5GHz 10W Base Station Installation Guide
3.2.1 Wall Installations
3. Fix three mounting hooks on both ends of the base station with M6*16 screw, as
shown in Figure 3-2.
4. Put the base station with mounting hook on the wall, mark the drilling locations, as
shown in Figure 3-3.
5. Drill three 12mm holes on the wall where marked.
6. Fix the base station to the wall using M10*80 expansion screws.

3.2.2 Install on Pole

1. Fix the mounting bracket with M6*16 screws on the base station, as shown in Figure
3-4.
Figure 3 - 3 Drilling Locations on Wall
9