Connection The Wire; Figure 3-18 Gps Connector Connect To Base Station - Bai cells Nova R9 Installation Manual

Baicells Nova R9 2.5GHz 10W Base Station Installation Guide
GPS antenna feeder should be as short as possible to reduce the signal attenuation.
7. GPS connector connects to the base station, as shown in Figure 3-18.

Figure 3-18 GPS Connector Connect to Base Station

8. Waterproofing measures need to be taken on the GPS connector and GPS antenna
connector, using the waterproof daub and waterproof tape. Refer to 3.2.3.3 Waterproof
Protection for further instructions.
Connecting the Wire
1. Connect the antenna feeder.
Connect two antenna feeders to the ANT0 and ANT1 interfaces, and connect the GPS
antenna feeder to GPS interface. The interfaces of the base station are shown in
Figure 3-19.
Figure 3-19 Connect Antenna Feeder
18