Table of Contents
Advertisement
Baicells Nova R9 2.5GHz 10W Base Station Installation Guide
In principle, no lightening rod can be welded to pole (no metal object is allowed within
1m range in the horizontal direction of the omnidirectional antennas), when installing
the omnidirectional antennas. Instead, an independent lightening rod should be
installed between two poles, where the lightening rod is high enough to keep all
antenna tops under its protective cover.
In case it is impossible to install an independent lightning rod due to environmental
limitations, the installation method as shown in Figure 3-8 can be used. Be aware that
the pole supporting the lightening rod should be kept at least 1m from the
omnidirectional outdoor antennas.
Figure 3-8 Omnidirectional Antenna Installation (2)
12
Advertisement
Table of Contents
