Table of Contents
Advertisement
Baicells Nova R9 2.5GHz 10W Base Station Installation Guide
Be aware that at least three layers of tapes are needed, and make sure that the last layer
is wrapped from the bottom up. The last layer should be in tight to keep it from cracking.
The overall appearance after waterproofing is shown in Figure 3-13.
3.2.3.4 Ground Protection
The grounding terminal is a screw beside the feeder interface, as shown in Figure 3-14.
One end of the ground wire connects to the grounding terminal of the base station, the other
end connects to the outdoor ground point. The connection need to be tin-soldered.
Figure 3-13 Antenna Waterproof Protection
Figure 3 - 14 Grounding Protection
15
Advertisement
Table of Contents
