Table Of Commands For Asm 456 - Siemens ASM 456 Operating Instructions Manual

5.4.2

Table of commands for ASM 456

Table of commands of the ASM 456 with Ident profile/RFID standard profile (FB 101/116/132)
Assignment is made in UDT 1 using the "command" variable. Note that some of the
commands shown in the table are block-specific and cannot be used with both blocks.
Table 5- 6 Commands of the ASM 456 with Ident profile Ident profile/RFID standard profile
Command
CREATE
DELETE
DEV-STATUS
GET-DIRECTORY
MEM-STATUS
NEXT
READ
SET-ATTRIBUT
UPDATE
WRITE
PHYSICAL-READ
PHYSICAL-WRITE
READER-STATUS
TAG-STATUS
INVENTORY
FORMAT
PUT
WRITE-ID
KILL-TAG
LOCK-TAG-BANK
EDIT-BLACKLIST
GET-BLACKLIST
ASM 456 interface module
Operating Instructions, 07/2015, J31069-D0162-U001-A6-7618
5.4 Parameter assignment with the Ident profile and FB 101/116/132
Command code
HEX ASCII
68 'h'
64 'd'
74 't'
6D 'm'
73 's'
6E 'n'
72 'r'
6F 'o'
75 'u'
77 'w'
70 'p'
71 'q'
74 't'
73 's'
69 'i'
66 'f'
65 'e'
67 'g'
6A 'j'
79 'y'
7A 'z'
6C 'l'
Description
Creates a new file.
Deletes a file from the transponder.
Reads out the status of a communications module
Reads the directory from the transponder
Reads out the status of a transponder
Does not permit any more operations on a transponder
Reads the data of a file
Sets/modifies the attributes belonging to a file
Writes data to a file
Writes data to a file
Reads data from a transponder/code reader system by specifying
the physical start address, the length and the password.
Writes data to a transponder/code reader system by specifying the
physical start address, the length and the password.
Reads out the status of the communications module/reader.
Reads out the status of a transponder.
Requests a list of all currently accessible transponders within the
antenna range.
Initializes the transponder.
Transfers further commands not specified in the standard profile.
To this end, a corresponding data structure is defined in the send
data buffer for each command.
RF680R/RF685R:
Writes a new EPC-ID to the transponder.
RF680R/RF685R:
The transponder is permanently deactivated.
RF680R/RF685R:
Defines a password for transponder access.
RF680R/RF685R:
The black list is processed. The current transponder can be added,
all identified transponders added, individual transponders deleted
or all transponders deleted.
RF680R/RF685R:
The entire TagIDs are read out from the black list.
Parameterization
41