Technical Specifications - Siemens ASM 456 Operating Instructions Manual

Technical specifications

Product type designation
Technical specifications - interfaces
Serial interface to the user
Principle
Transmission rate
Plug-in connection
Max. block length
Serial interface to the reader
Connector
Max. cable length
Connectable readers
Software functions
SIMATIC S7 function blocks
Non-Siemens systems
Tag addressing
Identification & Maintenance
MOBY I dialog
Normal station / VMDS
•
VMDS memory size
•
ASM 456 interface module
Operating Instructions, 07/2015, J31069-D0162-U001-A6-7618
ASM 456
ASM 456 (normal addressing)
PROFIBUS DP-V1
9600 Bd to 12 MBd (automatic detection)
EN 50170 Vol. 2 PROFIBUS
M12, 7/8" terminal block
•
ECOFAST terminal block
•
2 words cyclic / 240 bytes acyclic
2 x M12 connector plugs, 8-pin
1000 m, reader-dependent
(2 m = standard length; for other standard cables and self-assembled cables,
refer to the section "Connecting cables (Page 57)")
2 x readers of the RFID families RF200, RF300, RF600, MOBY D/U
FB 45/55 (normal addressing with-
•
out multitag)
Ident profile, RFID standard profile
•
with FB 101/116/132
Ident profile, RFID standard profile
Direct access via addresses
I&M0, I&M1, I&M2, I&M3
yes / yes
•
16 KB
•
6GT2002-0ED00
ASM 456 (filehandler)
FC 56 (filehandler with and without
•
multitag)
RFID standard profile with
•
FB 101/116/132
RFID standard profile
1)
Access via DOS-like file system
no / no
•
-
•
8
1
53