Table Of Commands For Asm 456 - Siemens ASM 456 Operating Instructions Manual

Parameterization
5.3 Parameter assignment with FB 45/55 and FC 56
5.3.2

Table of commands for ASM 456

Table of commands of the ASM 456 with standard addressing (FB 45)
The assignment is made in UDT 20/UDT 30 using the "command" variable.
Table 5- 4
*) Chained commands are not supported by all readers. Please note the relevant information
in the RFID/MOBY system manuals.
38
ASM 456 commands with normal addressing
Command code
normal chained*
01 41
02 42
03 43
04 44
08 48
0A 4A
0B 4B
Description
Write to transponder
Read transponder; read fixed code
Initialize transponder
Reader status
Turn off transponder
Switch antenna on/off
Transponder status
Operating Instructions, 07/2015, J31069-D0162-U001-A6-7618
available in
the MOBY system
all
all
RF300 /
RF620R/RF630R /
MOBY U / D
RF200 / RF300 /
RF620R/RF630R /
MOBY U / D
MOBY U
RF200 / RF300 /
RF620R/RF630R /
MOBY U / D
RF200 / RF300 /
RF620R/RF630R /
MOBY U
ASM 456 interface module