Turning The Rd-2000 On; Turning Off The Power; If You Don't Want The Power To Turn Off Automatically, Change The "Auto Off" Setting To "Off - Roland RD-2000 Owner's Manual

Turning the RD-2000 On

Once everything is properly connected, be sure to follow the
procedure below to turn on their power. If you turn on equipment in
the wrong order, you risk causing malfunction or equipment failure.
1.
Turn down the volume of the RD-2000.
Also completely turn down the volume of any connected external
devices.
2.
Press the [L] switch.
The unit is turned on, and the display's backlighting comes on.
3.
Turn on the power to connected external devices.
4.
Adjust the volume of the connected external devices.
5.
Adjust the RD-2000's volume.

Turning Off the Power

1.
Turn down the volume of the RD-2000.
Also completely turn down the volume of any connected external
devices.
2.
Turn off the power to connected external devices.
3.
Press the [L] switch.
The unit is turned off.
* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal
and does not indicate a malfunction.
* If you need to turn off the power completely, first turn off the
unit, then unplug the power cord from the power outlet. Refer to
"To completely turn off power to the unit, pull out the plug
from the outlet" (p. 2).
If you don't want the power to turn off
automatically, change the "Auto Off" setting to "Off"
The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto Off
function).
If you do not want the power to be turned off automatically, disengage
the Auto Off function.
NOTE
5 When the power is turned off, any settings you were editing will
be lost. You must save settings that you want to keep.
5 To restore power, turn the power on again.
Changing the auto off setting
1.
In the MENU screen, select "SYSTEM" and press the [ENTER]
button.
The System screen appears.
2.
Choose "Auto Off," and change the setting.
Parameter Value
[K] [J] [DEC] [INC]
Off
30 min
Auto Off
240 min (default)
3.
To store the auto off setting, press the [WRITE] button in the
System screen.
NOTE
When the auto off function turns the power off, the settings that you
were editing will be lost. If there are settings that you want to keep,
you should save them beforehand. For details, refer to "Saving the
Sound Settings in a Program (Program Write)" (p. 23) and "Saving the
system settings" (p. 26).
To Turn the Power On Again After It Was Turned Off by"Auto-Off"
If the auto off function turned the power off, turn off the [L] switch
and then turn the power on again.
Owner's Manual
Explanation
The power will not turn off
automatically.
The power will automatically turn off
if no operation is performed for 30
minutes.
The power will automatically turn off
if no operation is performed for 240
minutes (four hours).
11