Basic Operation - Roland RD-2000 Owner's Manual

Basic Operation

MENU screen
Here you can make system settings for the RD-2000 or manage files.
TONE screen
This is the screen that appears when you start up the RD-2000 or when
you press a TONE button.
This is the screen when zones are layered.
PROGRAM screen
This is the screen that appears when you press a PROGRAM button.
SCENE screen
Navigating among items to be set (cursor)
When more than one parameter is present in a screen, the name and
value of the parameter to be changed is shown with a box around
it. This box is referred to as the "cursor. " The cursor is moved with the
Cursor [H] [I] [K] [J] buttons.
Knob and slider operations
When you use a knob or slider to modify a setting, the modified
parameter and its value appears in a popup screen.
This screen will automatically close after a time.
For some parameters, a popup screen does not appear.
Editing a value
When changing settings values, you can use the [DEC] and [INC]
buttons, value dial, or the TONE buttons (numeric keys).
[DEC] button, [INC] button
Pressing the [INC] button increases the value, and the [DEC] button
decreases it.
Purpose Operation
To continuously
change the Hold down the [DEC] button or [INC] button.
value
To rapidly
Hold down the [INC] button and press the [DEC] button.
change the
Hold down the [DEC] button and press the [INC] button.
value
To set the item
to its default Press the [DEC] button and [INC] button simultaneously.
value
Value dial
Turn the dial clockwise to increase the value, or counterclockwise to
decrease the value.
TONE buttons ( numeric keys)
For some of the items, you can use the TONE buttons ([0]–[9]) as
numeric keys to directly specify a numeric value.
To use these as numeric keys in the TONE / PROGRAM / SCENE / ZONE
EDIT screen, operate the buttons while holding down the [SHIFT]
button. When you use the numeric keys to enter a value, the value
in the screen blinks. The blinking means that the value is not yet
confirmed, so press the [ENTER] button to confirm the value.
Confirming or canceling the value
To confirm the specified value, press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
[ENTER] button
[EXIT] button
Value dial
[INC] button
[DEC] button
7