Roland RD-2000 Owner's Manual page 9

8
Display
This shows the Tone name, the Program names and the values of
various settings, etc.
[MENU] button
Accesses the MENU screen. In the MENU screen, you can make overall
settings for the entire RD-2000.
[SHIFT] button
You can easily call up Edit screens for related parameters by holding
down this button while pressing buttons, turning knobs, or operating
other controllers. For details, refer to "List of Shortcut Keys" (p. 28).
If you edit a parameter value while holding down this button, the
value will change more greatly.
[EXIT] button
This is used to return to a previous screen or to cancel a procedure.
[ENTER] button
This is used to finalize a value or execute an operation.
Cursor buttons/Value dial
9
Value dial
These are used to modify values.
[DEC] button, [INC] button
These are used to modify values.
If you keep on holding down one button while pressing the other, the
value change accelerates.
These buttons modify the value that's controlled by the value dial.
Cursor [K] [J] [H] [I] buttons
Press these to switch pages and to move the cursor.
10
[ONE TOUCH PIANO] button
Recalls a piano sound to zone 1. Zones other than zone 1 and zone 5
(EXT) are turned off.
You can also specify a favorite sound (STARTUP).
NOTE
Be aware that when you press this button to recall a piano sound, the
previous settings are lost.
[PROGRAM] button
Selects a program.
BANK [UP] [DOWN] buttons
Change the program or scene bank.
[EXP] button
Selects banks of expansion sounds (p. 15).
[SCENE UTILITY] button
Accesses the SCENE UTILITY MENU screen.
[EDIT] button
Allows you to edit program settings.
[TONE DESIGNER] button
Accesses the TONE DESIGNER screen.
[KEY TOUCH] button
Adjusts the key touch.
[KEY RANGE] button
Specifies the key range.
TONE buttons
11
Select tones in each category.
12
[WRITE] button
Stores the current settings in a program.
If you press this button in certain screens (such as the System screen),
system parameters (p. 26) are stored.
[STOP/RESET] button
Stops playback of the song or rhythm.
[RHYTHM/SONG] button
Accesses a screen where you can select songs or rhythms.
[PLAY] button
Starts playback of the song or rhythm.
[SPLIT] button
Turns the split function on/off.
This lets you divide the keyboard into left and right regions and play a
different sound in each.
By pressing this button and the [TRANSPOSE] button simultaneously,
you can listen to demo songs.
[TRANSPOSE] button
Lets you transpose your performance.
Pitch bend/Modulation lever
13
This allows you to control pitch bend or apply vibrato.
NOTE
The effect of moving the lever will differ depending on the tone. The
effect of this lever is fixed for each tone, and cannot be changed.
Owner's Manual
9