Bake Element - Viking RDSOE306SS Service Manual

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit before servicing.
Wires removed during disassembly must be replaced on proper terminals to insure correct earth ground and
polarization. After servicing, reconnect electrical power.

Bake Element

To access bake element:
1. Slide unit out of installation (in order to
replace the bake element, the oven has to be
completely removed from the cabinet).
2. Remove rear cover (see Rear Cover
Disassembly).
3. Remove cooling fan (see Oven Cooling Fan).
4. Disconnect wiring, remove screws securing
rear trim pieces and remove trim.
5. Carefully remove insulation covering bake
element.
© 2012 Viking Preferred Service
6. Remove screws securing bake element to unit.
7. Slide bake element out.
8. Repair or replace bake element as necessary.
9. Reverse procedure to reinstall.
53