Main Top/Front Disassembly; Main Top/Rear Disassembly - Viking RDSOE306SS Service Manual

Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit before servicing.
Wires removed during disassembly must be replaced on proper terminals to insure correct earth ground and
polarization. After servicing, reconnect electrical power.

Main Top/Front Disassembly

To access main top/front:
1. Slide the unit out 6 – 8".
2. Remove screws securing front top panel.
3. Remove panel.
4. Reverse to reassemble.
© 2012 Viking Preferred Service

Main Top/Rear Disassembly

To access main top/rear:
1. Remove unit from installation.
2. Remove main top/front (see Main Top/Front
Disassembly).
3. Remove screws securing rear main top.
4. Remove panel.
5. Reverse to reassemble.
38