Oven Light Switch; Oven Selector Switch - Viking RDSOE306SS Service Manual

Service Diagnostics and Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit before servicing.
Wires removed during disassembly must be replaced on proper terminals to insure correct earth ground and
polarization. After servicing, reconnect electrical power.

Oven Light Switch

To access oven light switch:
1. Remove control panel (see Control Panel
Disassembly).
2. Remove nut securing light switch to backer
plate.
3. Reach into the opening and remove light switch
and disconnect wiring.
4. Repair or replace light switch as necessary.
5. Reverse procedure to reinstall.
© 2012 Viking Preferred Service

Oven Selector Switch

To access oven selector switch:
1. Remove control panel (see Control Panel
Disassembly).
2. Remove screws securing selector switch to
backer plate.
3. Reach into the opening and remove oven
selector switch and disconnect wiring.
4. Repair or replace oven selector switch as
necessary.
5. Reverse procedure to reinstall.
Note: When replacing the selector switch take note
of the position when reinstalling. There is a mark
on the back of the switch to indicate the "TOP" for
orientation.
42