Siemens SIMATIC Box PC 620 Manual page 47

Using a Mouse
You can connect both a PS/2-USB and a serial mouse to the
SIMATIC Box PC 620.
Connecting a PS/2 Mouse
You can connect an external PS/2 mouse or another external pointing device to an
additional PS/2-compatible mouse connector.
Port for PS/2 mouse
(socket)
Figure 4-4 Connecting the Mouse
To connect the mouse, proceed as follows:
1. Switch off your PC.
2. Plug the cable of the PS/2 mouse or another external pointing device into the
mouse connector.
3. Switch on your PC again.
Connecting a Serial Mouse
You can connect a serial mouse to the COM2 serial port. To operate a serial
mouse, the appropriate mouse driver must be initialized and assigned parameters.
You will find the information you need to do this in the description of your mouse or
in the description of the operating system.
1. Switch off your PC.
2. Plug the serial mouse into the mouse connector labeled COM2.
3. Secure the connector with the screws.
4. Switch on your PC again.
You can find out how to connect a USB mouse in "Connecting USB devices".
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04
Setting Up and Operating the SIMATIC Box PC 620
COM 2 Port for serial mouse
(connector)
USB connection for
USB mouse (socket)
4-7