Siemens SIMATIC Box PC 620 Manual page 105

"Hardware Options" Field
The following submenu appears when you select the "Hardware Options" field in
the main menu:
Main
PCI - MPI / DP:
On Board Ethernet
Ethernet Adress:
Cardbus/PCMCIA Slot:
SafeCard functions:
Legacy USB Suport:
CRT / LCD selection:
CRT 640 X 480:
CRT 800 X 600:
CRT 1024 X 768:
LCD-Screensize:
DSTN Contrast:
Trackball / PS/2 Mouse::
F1 Help
ESC Exit
Figure 6-8 "Hardware Options" Submenu
The parameters of the interfaces present on the basic module are set here.
Entry
PCI-MPI/DP *
On Board
Ethernet
Ethernet
Address
Cardbus /
PCMCIA Slot
SafeCard
functions
Legacy USB
Suport
SIMATIC Box PC 620 Manual
C79000-G7076-C639-04
PhoenixBIOS Setup-Utility
Hardware Options
[Enabled]
[Enabled]
[080006247000]
[Enabled]
[Enabled]
[Disabled]
[SIMULTAN]
[75 Hz]
[75 Hz]
[75 Hz]
[Graph& Text Expand]
[154]
[Auto]
Select Item + / – Change Values
Select Menu Enter Select
1
Enables the CP5611-compatible MPI/DP interface. The recourses are
managed by the BIOS PCI plug and play mechanism.
[Enabled]
The ethernet port on the motherboard is enabled.
[Disabled]
The ethernet port on the motherboard is disabled.
The individual ethernet address is entered here.
[Disabled]
Disables the Cardbus / PCMCIA interfaces.
[Enabled]
The resources are managed by the BIOS
PCI plug and play mechanism.
[Enabled]
On board monitoring functions are enabled.
[Disabled]
No monitoring functions.
The relevant driver and the application must be started for operation of
the monitoring functions.
[Disabled]
A USB-capable operating system is required to
operate a USB keyboard or a USB mouse.
Setup adjustments can be made with a USB keyboard.
[Enabled]
USB keyboard and USB mouse are supported by the
BIOS. Non-USB capable operating systems can be
used.
Configuring the SIMATIC Box PC 620
Item Specific Help
Enable or disable the
PCI - Multi Point
Interface (MPI / DP)
F9 Setup Defaults
Sub-Menu F10 Save and Exit
Meaning
6-13