Additional Safety Instructions - Parkside PMFS 200 B2 Translation Of The Original Instructions

power source and/or the bat-
tery pack from the power tool
before making any adjust
-ments, changing accessories, or
storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
• Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that
may affect the power tool's op-
eration. If damaged, have the power
tool repaired before use. Many acci-
dents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
• Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, tak-
ing into account the working
conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
• Hold the device by the insu-
lated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring or its
own cord. Contact with a live wire
can also cause a charge in metal parts
of the device and result in an electric
shock.
5) SERVICE
• Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety of
the power tool is maintained.

Additional safety instructions

Warning! Sawing or sanding
can result in the formation of
hazardous dusts (e.g. arising
from materials with paints con-
taining lead, materials contain-
ing asbestos, metals or some
wood types) which can present
a hazard to the operator or
persons in the vicinity. Make
sure that the workplace is well
ventilated. Always wear safety
goggles, safety gloves and
respiratory protection. Attach a
dust extraction system.
1) SPECIAL SAFETY INFORMATION
FOR THE CORDLESS COMBINA-
TION TOOL
Secure the workpiece. A work-
•
piece that is retained with clamping ap-
pliances or a vice is held more securely
than with your hand.
Only use the power tool for dry
•
sanding. Do not scrape moist
materials. Penetration of water into
the power tool increases the risk of elec-
tric shock.
Avoid overheating the sanded
•
object and the sander itself. Pos-
sible fire hazard.
The workpiece gets hot dur-
•
ing grinding. Do not touch the
machined area, allow it to cool
GB IE NI
9