Cisco Catalyst 4500 series Administration Manual page 818

Configuring LLDP and LLDP-MED, and Location Service
Command
Step 5
Switch(config)# end
Step 6
Switch# copy running-config
startup-config
This example shows how to enable LLDP on an interface:
Switch# configure terminal
Switch(config)# interface GigabitEthernet 1/1
Switch(config-if)# lldp transmit
Switch(config-if)# lldp receive
Switch(config-if)# end
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
31-8
Chapter 31
Purpose
Returns to privileged EXEC mode.
Saves your entries in the configuration file.
Configuring LLDP, LLDP-MED, and Location Service
OL_28731-01