Dynamic Port Vlan Membership Configuration Example - Cisco Catalyst 4500 series Administration Manual

Chapter 16 Configuring VLANs, VTP, and VMPS

Dynamic Port VLAN Membership Configuration Example

Figure 16-4 on page 16-29
dynamic ports. In this example, these assumptions apply:
•
•
•
•
•
Figure 16-4
station 1
Secondary VMPS
station 2
Secondary VMPS
OL_28731-01
shows a network with a VMPS servers and VMPS client switches with
The VMPS server and the VMPS client are separate switches.
The Catalyst 4000 family Switch 1 (running Catalyst Operating System) is the primary VMPS
server.
The Catalyst 6000 family Switch 3 (running Catalyst Operating System) and the URT are secondary
VMPS servers.
End stations are connected to these clients:
Catalyst 4500 series XL Switch 2 (running Catalyst Cisco IOS)
–
– Catalyst 4500 series XL Switch 9 (running Catalyst Cisco IOS)
The database configuration file is called Bldg-G.db and is stored on the TFTP server with the IP
address 172.20.22.7.
Dynamic Port VLAN Membership Configuration
Catalyst 4000
(CatOS)
Primary VMPS
Server 1
Switch 1
3/1
End
Switch 2
Catalyst 6000
(CatOS)
Server 2
Switch 3
Switch 4
Switch 5
Switch 6
Switch 7
Switch 8
End
Switch 9
URT
Server 3 Switch 10
172.20.26.150
Client
172.20.26.151
172.20.26.152
172.20.26.153
172.20.26.154
172.20.26.155
172.20.26.156
172.20.26.157
Client
172.20.26.158
172.20.26.159
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
VLAN Membership Policy Server
TFTP server
Router
172.20.22.7
16-29