Displaying Vtp Devices In A Domain - Cisco Catalyst 4500 series Administration Manual

VLAN Membership Policy Server
VTP pruning statistics:
Trunk
---------------- ---------------- ---------------- ---------------------------
Fa5/8

Displaying VTP Devices in a Domain

To display information for all the VTP devices in a domain, perform this task:
Command
Switch# show vtp devices [conflicts]
This example shows how to display information for VTP devices in a domain:
Switch# show vtp devices
Retrieving information from the VTP domain, please wait for 5 seconds.
VTP Feature Conf Revision Primary Server Device ID
----------- ---- -------- ------------------------------
VLAN
VLAN
MST
Switch#
VLAN Membership Policy Server
This section describes how to configure dynamic port VLAN membership through the VLAN
Membership Policy Server (VMPS), and includes the following subsections:
•
•
•
•
About VMPS
These subsections describe what a VMPS server does and how it operates:
•
•
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
16-20
Join Transmitted Join Received
43071
No 18 0016.9c6d.5300 0012.011a.0d00
No 18 0016.9c6d.5300 0012.4371.9ec0
Yes 4 0012.4371.9ec0=0012.4371.9ec0
About VMPS, page 16-20
Overview of VMPS Clients, page 16-23
Dynamic Port VLAN Membership Configuration Example, page 16-29
VMPS Database Configuration File Example, page 16-32
Understanding the VMPS Server, page 16-21
Security Modes for VMPS Server, page 16-21
Chapter 16
Summary advts received from
non-pruning-capable device
42766 5
Purpose
Gathers and displays information for all the VTP devices
in the domain.
No information is gathered or displayed from
Note
switches set to vtp modes off or to transparent
for a particular feature.
The conflicts keyword (optional) displays the
information of devices that have conflicting primary
servers.
Device Description
------------------
R2
R1
R1
Configuring VLANs, VTP, and VMPS
OL_28731-01