Cisco Catalyst 4500 series Administration Manual page 397

Chapter 8 Configuring Interfaces
•
Command
Step 1
Switch# configure terminal
Step 2
Switch(config)# hw-module module m port-group p
select [gigabitethernet | tengigabitethernet]
Step 3
Switch(config)# exit
Step 4
Switch# show int status mod n
OL-30933-01
Te1/1
Te1/2
Te1/3
Te1/4
Te1/5
Te1/6
Gi1/7
Gi1/8
Gi1/9
Gi1/10
Gi1/11
Gi1/12
Gi1/13
Gi1/14
Gi1/15
Gi1/16
Gi1/17
Gi1/18
Switch#
To configure the modes of operation for each X2 port group in which you want to deploy Gigabit,
enter the hw-module module m port-group p select gigabitethernet command. This configuration
is preserved across power cycles and reloads.
To deploy Gigabit Ethernet interfaces using the TwinGig Convertor, perform this task:
This example shows how to select Gigabit Ethernet interfaces on a WS-X4606-10GE-E using the
TwinGig Convertor:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# hw-module module 1 port-group 1 select gigabitethernet
Switch(config)# exit
Switch# show int status mod 1
Port Name
Te1/1
Te1/2
Te1/3
Te1/4
Te1/5
Te1/6
Gi1/7
Gi1/8
Gi1/9
Gi1/10
Gi1/11
Gi1/12
Deploying 10-Gigabit Ethernet or Gigabit Ethernet Ports
notconnect 1
connected 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
inactive 1
Purpose
Establishes global configuration mode.
Selects the mode of operation for each X2 port-group.
Default is 10-Gigabit Ethernet (x2).
Exits configuration mode.
Verifies the setting.
End with CNTL/Z.
Status Vlan
inactive 1
inactive 1
inactive 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
notconnect 1
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
full 10G 10GBase-LR
full 10G 10GBase-LR
full 10G No X2
full 10G No X2
full 10G No X2
full 10G No X2
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
Duplex Speed Type
full 10G No X2
full 10G No X2
full 10G No X2
full 10G No X2
full 10G No X2
full 10G No X2
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
full 1000 No Gbic
8-15