Rf Module - Panasonic KX-TCD705RUM Service Manual

5.3.

RF MODULE

BLOCK DIAGRAM RF MODULE
5.3.1. RF MODULE (SEE BLOCK DIAGRAM Fig.22)
The RF Module consists of two main components: the PMB6610 transceiver and the PMB6818 power amp.
In the transceiver the 10.368MHz clock signal SYCL is multiplied to around 1.9GHz using PLL (Phase Locked Loop) control.
The TXDA signal is used to control the modulation of this frequency by up to +/- 400 kHz.
Received signals are demodulated, filtered and sent to the BBIC via the RXDA line.
The RSSI (Radio Signal Strength Indicator) signal enables the implementation of diversity switching whereby two antennae can
be mounted in different orientations and their signals compared. The one with better reception can be selected by the BBIC
using the ANT1 and ANT2 lines.
23
KX-TCD705RUM / KX-TCD705RUS