Installing The Chassis In The Rack - Alcatel-Lucent OmniSwitch 6350 Hardware User's Manual

Mounting OmniSwitch 6350 Switches

Installing the Chassis In the Rack

1
Mark the holes on the rack where the chassis is to be installed.
2
One person should lift and position the chassis until the rack-mount flanges are flush with the
rack post.
3
Align the holes in the flanges with the rack holes marked in step 1.
4
Once the holes are aligned, the second person should insert a screw through the bottom hole on each
flange. Tighten both screws until they are secure.
5
Install the remaining screws in the top hole of each flange. Be sure that all screws are
securely tightened.
OmniSwitch 6350 Hardware Users Guide October 2016
Rack-Mounting
page 4-7