Cable Connections; Connecting The Power Cord - Roland MDX-40A User Manual

2-3 Cable Connections

Connecting the Power Cord

WARNING
WARNING
WARNING
WARNING
WARNING
Right side
34
Chapter 2 Installation and Setup
Do not use with any electrical power supply that does not meet the
ratings displayed on the unit.
Use with any other power supply may lead to fire or electrocution.
Handle the power cord, plug, and electrical outlet correctly and with
care. Never use any article that is damaged.
Using a damaged article may result in fire or electrical shock.
When using an extension cord or power strip, use one that ad-
equately satisfies the machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy
extension cord may cause fire.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the
event of malfunction.
Connect to an electrical outlet. Never connect directly to a power
distribution panel or other such fixed wiring equipment.
Doing so increases the hazard of fire or electrical shock.
Electrical outlet
Power cable