Table of Contents
Advertisement
5-8 Specifications
Main Specifications
Cuttable material
X, Y, and Z operation
strokes
Distance from collet tip
to table
Workpiece table size
L o a d a b l e w o r k p i e c e
weight
X-, Y-, and Z-axis drive
system
Operating speed
Software resolution
Mechanical resolution
Spindle motor
Spindle rotation
Tool chuck
Interface
Control command sets
Power requirements
Power consumption
Operating noise
External dimensions
Weight
Installation Environment
Included items
94
Chapter 5 Appendix
Chapter 5 Appendix
Resins such as chemical wood and modeling wax (metal not sup-
ported)
X, Y, and Z: 305 x 305 x 105 mm (12 x 12 x 4.13 in.)
Maximum 123 mm ( 4.84 in.)
Width x depth: 305 × 305 mm (12 x 12 in.)
4 kg (8.8 lb)
Stepping motor
XY-axis : 7 to 3000 mm/min. (0.28 to 118 in./m)
Z-axis : 7 to 1800 mm/min. (0.28 to 70.8 in./m)
* 2 mm/min step for 7 to 60 mm/min(0.28 to 2.36 in./m)
* 60 mm/min step for 60 to 3000 mm/min(2.36 to 118 in./m).
0.01 mm/step (0.00039 in./step) (RML-1),
0.001 mm/step (0.000039 in./step) (NC code)
0.002 mm/step (0.000078 in./step) (micro-step control)
Brushless DC motor, maximum 100W
4,500 to15,000 rpm
Collet method
USB (compliant with Universal Serial Bus Specification Revision
1.1)
RML-1, NC code
Voltage and frequency: AC 100 to 240 V ±10%, 50/60 Hz (overvolt-
age category II, IEC 60664-1)
Required power capacity: 2.1 A
Approx. 210 W
During operation: 56 dB (A) or less (when not cutting), during
standby: 42 dB (A) or less
Width x depth x height : 669 x 760 x 554 mm (26.4 x 30 x 21.9 in.)
65 kg
Operating environment: Temperature of 5 to 40°C (41 to 104 °F),
35 to 80% relative humidity (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Power cord, USB cable, collet , Z0 sensor, hexagonal screwdrivers,
hexagonal wrench, spanners, User's Manual (this document), SRP
Player Installation and Setup Guide, SRP Player CD-ROM, Roland
Software Package CD-ROM
MDX-40A
Advertisement
Table of Contents
