Table 2.32 Ports And Leds Of The Gplimt - Samsung OfficeServ 7200 System Description

The components on the front panel of the GPLIMT have the functions below:
Ports, LEDs
P1~12
P13, P14
Left LED of P1~6
Right LED of P1~6
LNK LED
SPD LED
RST
© SAMSUNG Electronics Co., Ltd.

Table 2.32 Ports and LEDs of the GPLIMT

Ports that connect to the 10/100BASE-T Ethernet
Ports that connect to the 10/100/1000 BASE-TX GbE (Gigabit Ethernet)
First LED: Indicates if the P1~6's link is operating
- On: When the link is operating, LED is turned on into green color
- Blink: When each port is active, the LED is blinking
Second LED: Indicates whether the P1~6 are operating in 10/100 BASE-T
mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
First LED: Indicates if the P7~12's link is operating
- On: When the link is operating, LED is turned on into green color
- Blink: When each port is active, the LED is blinking
Second LED: Indicates whether the P7~12 are operating in 10/100 BASE-
T mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
- Turns on if the Giga port P13~14's link is connected.
- Blinks if the corresponding ports are active.
Indicates whether the Giga ports P13~14 are operating in 10/100/1000
BASE-T mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
- Blink: The ports are operating in 1000 BASE-TX mode
Button for resetting the GPLIMT
OfficeServ 7200 System Description
Functions
2-43