Rings And Tones; Ring Cycles; Ring; Table 3.22 System Ring Cycles - Samsung OfficeServ 7200 System Description

CHAPTER 3. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.

3.4 Rings and Tones

3.4.1 Ring Cycles

The OfficeServ 7200 provides the trunk line rings, station rings, door rings, and alarm rings.
The ON/OFF cycle of each ring is shown in the table below:
(It is different according to a country and available to be modified by the software)

Ring

Trunk line ring
Station ring
Door ring
Alarm ring
Ring ON/OFF Cycle
The ON/OFF cycle can be adjusted by changing the values of the system
database.
3.4.2 Ring
The output voltage and frequency of the ring signals in the OfficeServ 7200 are as follows:

Output voltage: 75 Vrms Square Wave (Built in SLI)
75 Vrms External Sinewave (Italy, Australia)

Frequency: 20 or 25 Hz
The OfficeServ 7200 provides the users with various tones to notify the users of the status
of functional operations and give feedback to the users. The ON/OFF cycles of currently
specified tones are shown in the table next page:
3-16

Table 3.22 System Ring Cycles

1000/2000 ms
400/200/400/3000 ms
400/200/400/200/400/2000 ms
400/200/400/200/400/200/400/1000 ms
ON/OFF Cycle
© SAMSUNG Electronics Co., Ltd.