Board View
The 4TRM can be mounted as a daughter board on the UNI.
There is no separate line connection part within the 4TRM. It is connected to an
external line through the RJ-45 connector on the line connection part, located at the left
side of the system.
P1
Ports
P1
J1
© SAMSUNG Electronics Co., Ltd.
Figure 2.16 4TRM
Table 2.19 Ports of the 4TRM
100-pin Connector
Connector for connecting a signal line to the UNI board
Connector for connecting lines to the four (4) ports
OfficeServ 7200 System Description
Functions
J1
2-27