Table 2.30 Ports And Leds Of The Plim - Samsung OfficeServ 7200 System Description

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
The components on the front panel of the PLIM have the functions below:
Ports, LEDs
P1~16
Left LED of Each Port
Right LED of Each Port
Selecting PLIM Power Supply
The PLIM is available to use the internal rectifier (PSU: Power Supply Unit) or
external rectifier, and select the power supply source through using the shunt pin.
The detail is described in OfficeServ 7200 Installation Manual.
2.3.4.4 PLIM2
The PLIM2 transmits the data through the intranet, and provides a 10/100 BASE-T
interface. It provides the Power over Ethernet (PoE) function to supply the 48 V power to
externals and also provides a simple switching function.
Major Functions
The major functions of the PLIM2 are as follows.

10/100 BASE-T, Full/Half duplex automatic detection function

Switching function

PoE function
Setting PLIM2
Using the shunt pin (J1, J2, J3), the PLIM2 can select from the internal PSU
(connect shunt pin no. 1-2) and the external rectifier (connect shunt pin no. 2-3).
Refer to the 'OfficeServ 7200 Installation Manual' for more details concerning the
connection of the shunt pin.
Specification
The PLIM2 provides 16 10/100 BASE-T ports.
2-40

Table 2.30 Ports and LEDs of the PLIM

Ethernet Connection Port
Link Operation
- Blinking: Link is in operation
10/100 BASE-T Operation
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-Tx
Functions
© SAMSUNG Electronics Co., Ltd.