Figure 2.5 Front View Of The Lcp; Table 2.9 Ports And Leds Of The Lcp - Samsung OfficeServ 7200 System Description

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
2.3.1.3 LCP
The Local Control Processor (LCP) is the minor control board that interworks the MP20,
which is the main control part of the basic cabinet, with the expansion cabinet.
The LCP controls a variety of line boards and sends/receives information to/from the MP20.
Front View of LCP
The front view of the LCP is shown in the figure below:
LINK1
LINK2
The components on the front panel of the LCP have the functions below:
Ports, LEDs
LINK1~3
SIO
RST
RUN LED
MP20 LED
2-14
LINK3
SIO

Figure 2.5 Front View of the LCP

Table 2.9 Ports and LEDs of the LCP

Ports that connect the MP20 with the LCP.
UART port (for tests).
Button for resetting the LCP board.
This LED indicates the status of the LCP.
- Off: Power is not connected.
- On: Booting.
- Blinking: Program in operation.
This LED indicates the status of signaling message processing.
- Off: There's no message exchange between MP20 and LCP.
- On: Messages are being sent/received to/from the MP20.
RUN
MP20
RST
Functions
© SAMSUNG Electronics Co., Ltd.
LCP