Table of Contents
Advertisement
Solution Ultima 862
Arming The System (On)
AWAY Mode
Press and hold the # key until two beeps are
1.
heard.
Or
Enter your code followed by the # key.
2.
[eg. 2580 + #].
STAY Mode 1
Press and hold the * key until two beeps are
1.
heard.
Or
Enter your code followed by the * key.
2.
[eg. 2580 + *].
STAY Mode 2
Press and hold the 0 key until two beeps are
1.
heard.
Disarming The System (Off)
AWAY Mode
Enter your code followed by the # key.
1.
[eg. 2580 + #].
STAY Mode 1
Press and hold the * key until two beeps are
1.
heard (Only if no alarm).
Or
Enter your code followed by the # key.
2.
[eg. 2580 + #].
STAY Mode 2
Press and hold the 0 key until two beeps are
1.
heard (Only if no alarm).
Or
Enter your code followed by the # key.
2.
[eg. 2580 + #].
Quick Reference Guide
Electronics Design and Manufacturing Pty LimitedSOL ULTIMA 862 QUICK REF GUIDE.D
Isolating Zones
Standard Isolating
Press the * key twice.
1.
Enter the zone number that you want to
2.
isolate followed by the * key.
Repeat step 2 if more than one zone is
required to be isolated.
Press the # key to exit when finished.
3.
Code To Isolate
Press the * key once.
1.
Enter your user code, followed by the * key .
2.
Enter the zone number that you want to
3.
isolate followed by the * key.
Repeat step 2 if more than one zone is
required to be isolated.
Press the # key to exit when finished.
4.
Add/Delete RF Devices (Wireless Zones)
Add RF Device
Enter the Installer Code followed by 0 and the
1.
# key [eg. 1234 + 0 + #].
Enter the Device Number (1 – 16) that you
2.
want to add followed by the # key.
Enter the 9-digit RF device ID number
3.
followed by the # key.
Delete RF Device
Enter the Installer Code followed by 0 and the
1.
# key [eg. 1234 + 0 + #].
Enter the Device Number (1 – 16) that you
2.
want to delete followed by the # key.
Press the * key to delete the RF device.
3.
5
Advertisement
Table of Contents
