Jumper Definitions - Samsung WA31273A Technical Manual

4-5 Configuration Jumpers(J5)

Jumper Definitions:

ST SST
CSEL CSEL
SLAVE SLAV
MASTE MASTER
ST – Reserved for Manufacturing Test Process.
This jumper is used by Samsung engineers for development purpose
CSEL - Cable Select.
This jumper is used if Cable Select line is used for master and slave selection.
SLAVE - Slave Mode.
This jumper, when installed, is for configuring the drive in Slave Mode. Master jumper must be removed
when Slave Mode is configured.
MASTER - Master Mode
This jumper, when installed, is for configuring the drive in Master Mode. This jumper must be removed
when drive is configured in Slave Mode
Default Jumper Setting - Master Mode
STDFSs ST
CSELC CSEL
SLAVE SLAV
MASTE MASTER
Slave Jumper Setting - Slave Mode
ST ST
CSEL CSEL
SLAVE SLAV
MASTE MASTER
WA31273A / WA32543A / WA33203A / WA32163A / WA31083A / WA32162A
Installation and Operation
4-7