Step 2: Install the Router
Tools Required to Install the Router in a Rack
Install the Mounting Brackets
Copyright © 2015, Juniper Networks, Inc.
Tools Required to Install the Router in a Rack on page 7
Install the Mounting Brackets on page 7
Install the ACX4000 Router in the Rack on page 8
To install the router in a rack, you need the following tools:
Phillips (+) screwdriver, number 2
ESD grounding wrist strap
Two mounting brackets for front mounting ship with the router (see
Attach both mounting brackets to the front of the chassis:
Align the bracket with the three sets of mounting holes.
1.
Insert the six screws at the top, middle, and bottom of the bracket and tighten each
2.
partially.
Tighten the four screws completely.
3.
Repeat the procedure for the other bracket.
4.
Figure 3: Installing the Mounting Brackets to the Front of the ACX4000
Router
Step 2: Install the Router
Figure 3 on page
7).
7