Carrier AquaEdge 19XR series Installation Instructions Manual page 33

SOLEPLATE DIMENSIONS
HEAT EXCHANGER FRAME SIZE
1 THROUGH 6
1.5 in.
(38.1 mm)
(254 mm)
21.25 in. 18.25 in.
(539.8 mm) (463.6 mm)
1.5 in.
(38.1 mm) (177.8 mm)
LEGEND
HRS — Hot Rolled Steel
NOTES:
1. Dimensions in ( ) are in millimeters.
2. Accessory (Carrier supplied, field installed) soleplate package includes 4 soleplates, 16 jacking screws and leveling pads.
3. Jacking screws to be removed after grout has set.
4. Thickness of grout will vary, depending on the amount necessary to level chiller. Use only pre-mixed non-shrinking grout, Ceilcote 748
or Chemrex Embeco 636 Plus Grout, 1½ in. (38.1 mm) to 2¼ in. (57.2 mm) thick.
NOTE: The accessory spring isolators are supplied by Carrier for installation in the field.
Fig. 14 — 19XR Accessory Spring Isolation (Shown with Accessory Soleplates)
10 in.
7/8-9UNC-4 HOLES FOR
JACKING SCREWS
a19-2003
7 in.
ACCESSORY SOLEPLATE DETAIL
Fig. 13 — Accessory Isolation
SOLEPLATE DIMENSIONS
HEAT EXCHANGER FRAME SIZE
1.5 in.
(38.1 mm)
28 in. 25 in.
(711.2 mm) (635 mm)
1.5 in.
(38.1 mm)
VIEW X-X
33
7 AND 8
17 in.
(431.8 mm)
7/8-9UNC-2B HOLES FOR
JACKING SCREWS
a19-2002
14 in.
(355.6 mm)
a19-1110tf
a19-1521tf