Assembly Instructions - Spirit CT850 ENT Owner's Manual

Assembly Instructions

Step 1: Uprights
 The right upright (34) is with preinstalled lower computer cable (42)、TV Signal Cable(171)、
Console Power Cord(173)、network W/Cable(175)、CSAFE W/Cable(177)、HDMI Cable(181)，
To install uprights on the frame base, special care must be taken not to pinch the computer
cable between the upright and frame base. Use first 3/8"-16 × 3"_Button Head Socket Bolt (144)
together with 3/8'' × 16.5 × 2.0 × 4H_Split Washer (117), and 3/8" × 35 × 2T_Flat Washer (116)
through the top hole in the retaining plate (98), and corresponding top hole in the upright tube,
and screw into the base frame. Now install the other
Socket Bolt (144) together with 3/8'' × 16.5 × 2.0 × 4H_Split Washer (117), and 3/8" × 35 ×
2T_Flat Washer (116) and tighten all
 Same as the above step to install left upright (33).
 Use four M5 × 12L Phillips Head Screws (134) install left and right motor base cap (26, 27)
four
five bolts up.
-6-
bolts 3/8"-16 × 3"_Button Head