Pci Fan And Baffle Option - HP HPE ProLiant ML110 Gen9 User Manual

Connect the cable to the rear of the drive and then route the cable through the drive bay.
10.
Connect the power cable.
11.
Route the SATA cable underneath the metal tabs, and connect the opposite end of the cable to the
12.
connector on the system board.
Install the system air baffle (on page 22).
13.
If removed, install the PCI air baffle
14.
Install the front bezel (on page 19).
15.
Install the access panel (on page 18).
16.
Return the server to an upright position.
17.
Connect each power cord to the server.
18.
Connect each power cord to the power source.
19.
Power up the server.
20.

PCI fan and baffle option

("Install the PCI air baffle" on page 20).
Hardware options installation 57