Ink Light And Error Light (Synchronous) Flashing; Ink Light And Error Light (Alternating) Flashing Fast; Basic Steps For Printing A Shirt - Epson Fast T-Jet 3 PLUS User Manual

T-Jet3 PLUS User's Manual

Ink Light and Error Light (alternating) Flashing Fast

The printer thinks the Waste Tank is Full. This will only happen after the printer
reaches approximately 15,000 prints. Open FastRIP and go to Printers > Printer
Properties, or click on the last icon in the toolbar that says Print status and
settings. Click on the Reset Ink Pad Counter button and the error should clear in
approximately 10 seconds.
Support Hours
Toll Free
Technical Support
Corp. Offi ce
Fax
Email:
Internet:
Support hours:
Note: Arizona does not observe "Daylight Savings Time."

Basic Steps for Printing a Shirt

OK, the time has come. You have installed the Bulk Ink System, you have
created a image in your favorite graphics program and now you are ready
to ruin a few shirts. Yes, we did say ruin a few shirts. Be warned, there is a slight
learning curve to printing a shirt and you must get over the fact some will get
ruined.
When printing an image, you must be aware of print placement- This includes
reconciling what you see in your graphics application Page with where the
image will sit on the shirt. Your printer will also need to be "broken in" a little.
When you fi rst install the Bulk System, there is a chance not all the inks are
fl owing yet. You won't really know this until you have done a print or two, or a
Nozzle Check. Therefore, you should start off by using clean rag shirts, or just
accept the fact that you will ruin a few new shirts and buy some extras. Your fi rst
print may NOT be a winner, but after you have printed a few shirts you will feel
like an old pro.
Just remember, it is ONLY a shirt. Even when you HAVE become a seasoned pro,
ruined shirts are a fact of life in the garment decorating industry.
Version 1.1 Revised July, 2008
+1 888-MYTJETS (698-5387)
+1 480-929-2937
+1 480-929-0640
+1 480-929-0766
support@usscreen.com
www.screenprinters.net
7:00am to 6:00pm Monday through Friday
9:00am to 3:00pm Saturday
(Mountain Standard Time) USA
42
Click on the Support tab.