Epson Fast T-Jet 3 PLUS User Manual page 97

6. The Waste Ink Pad Counter window will still
be present. Click on the Initialization button
as shown on the right.
7. Another Information pop-up will appear, indicating that the Waste Ink
Counter has initialized properly. Click on OK.
8. Click on the Read button once more to record the initial value of 1777.
9. When the Information pop-up appears, click on
10. Select Finish from the bottom of the Waste Ink Pad Counter window and exit
the Adjustment program.
11. Turn OFF your Fast T-Jet3 PLUS by using the
Power switch, located on the rear of your printer adjacent the
power cord.
12. Manually center the Print Bed by applying a light pressure against it with your
hand.
13. The fi nal step is a Manual Reset of your printer. This will complete the Waste
Tank Reset process.
▪ While holding down the Power button, fl ip the Power switch.
▪ The Print Bed will begin to move back and forth. Don't interfere with its
movement, this is part of the reset process.
▪ Allow the Print Bed to move back and forth at least 2 times, then turn OFF
the printer using the Power switch.
Chapter 7 - Utilities to Improve Print Quality
OK.
Power button and
87