Error Light Is On And The Processing Light Is Flashing; Correcting Usb Problems; Printer Does Not Work Correctly With The Usb Cable - Epson STYLUS PHOTO 895 Manual

L R4C706
long.bk
A5 size
7/19/01

Error light is on and the Processing light is flashing

Correcting USB Problems

Printer does not work correctly with the USB cable

10-22
Rev. C
TRBLE.FM
b
If the error light is on and ink is out, replace the
appropriate ink cartridge. To determine which ink cartridge
is empty, see "Replacing Ink Cartridges" on page 8-1.
Follow the steps below.
b
1. Press the maintenance button, then remove any paper in
the printer.
2. Turn the printer off. Check for and remove any foreign objects
or pieces of paper from inside the printer. Also, make sure
that there is sufficient space around the vent on the back of
the printer to allow proper ventilation. Remove any objects
blocking the vent, then turn the printer back on.
Note:
If you cannot remove a foreign object easily by yourself, do not use
force and do not disassemble the printer. Call your dealer for
assistance.
3. If the error does not clear, contact your dealer.
If you are having difficulty using your printer with a USB
connection, see if your problem is listed below, then follow the
instructions given to resolve the problem.
If your printer does not work correctly with the USB cable, try one
or both of these solutions:
Troubleshooting
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname