While Stoking - barbas Cuatro-2 60 Installation Instructions Manual

When setting the fi re, move the locking slider all the way to the left. If necessary,
leave the door ajar for 10 minutes. Do not open the door wide, as the window
will remain cold. If the door is shut during this time, smoke will condense on the
glass and form soot. Move the air supply slider all the way to the right " + "
only when starting the fi re.
Prevent white glow and over-fi ring.
6.3. INSTRUCTIONS WHILE STOKING
After approx. 10 minutes, the fi re will be burning fi ercely. You can now top it up
with a few larger blocks of wood. Move the locking slide all the way to the right
when the blocks are burning well and close the door.
Using the air supply slider you can now adjust the air supply for further
combustion. Make sure the fi re burns quietly.
Note: Once you have got the fi re going, leave the air supply slider in the centre
position for optimal combustion. Your fi re will then be much cleaner and more
effi cient (more heat, less topping up).
34
CUATRO-2 60
Control range of primary air supply
Control range of secondary and tertiary air supply
Combustion air supply slider
Centre position
CUATRO-2 70 CUATRO-2 80