barbas Cuatro-2 60 Installation Instructions Manual page 18

3.3.3. Fitting in a newly-built chimney breast
• If required, a convection set can be added when installing the appliance.
• Appliance without fan box:
The use of a convectionset is strongly recommended.
• Appliance with fan box:
The use of a convectionset is possible, but not mandatory.
• In the case of utilisation of a convectionset:
Carefully break out the "break-away openings" at the side (2x) or at the back
(1x) of the appliance.
• Use convection set:
The function of the convection set (option) is to improve the convection
through the appliance, resulting in effi ciency improvement and preventing
high temperatures in the chimney breast.
The set consists of: • 3 m alufl ex
• Assembly convection set:
° Secure the 2 collar adaptors to the appliance.
18
CUATRO-2 60
• 2 exit grids (white)
• 2 collar adaptors Ø125 mm
• 4 hose clamps
CUATRO-2 70 CUATRO-2 80