barbas Cuatro-2 60 Installation Instructions Manual page 25

CUATRO-2 60 CUATRO-2 70
3.4 HEAT TRANSFER WITH SUBSTRUCTURE FAN BOX
The heat transfer can be increased by transporting the heat with the convection
fan box (optional). With this system, hot air is blown into the room.
The convector fan built into the box is regulated by a built-in dimmer, with an
integrated on/off switch.
The fan does not have any automatic regulation based on the appliance
temperature.
3.5 INSTALLING FAN BOX
It is advisable to remove the complete door before installing the fan box; this can
be done by tilting the door upwards when in the open position and removing it.
Carefully place the appliance on its
back and use a hammer to knock
out the round "break away" disc.
CUATRO-2 80
Remove the round disc.
25